DIY Coin Mechanism Programmers

Mechanisms Covered

Satisfied users in over 35 different countries worldwide

Mektek UK Ltd
Unit 20 Soho Mills Estate
Wooburn Green, Bucks
HP10 0PF  United Kingdom
Tel: +44 1628525525
Fax: +44 1628525549
Email:

If your mechanism is listed here you can program it yourself with a Mektek Programmer

Go to Mobile friendly site

Each type of coin mechanism can have a number of variants. Most variants of the mechanisms of the types listed below have been proven to program successfully on the Mektek Programmers. If a particular mechanism is not listed it does not mean that it cannot be programmed. Simply call our Helpline or Email us for free advice.

Mektek Classic Program

Mars Legacy Mechanisms

Coin Controls
 Mechanisms

ME111
ME115
ME115TS
ME126
ME129
MS111B1
MS111
MS125
MS126
MS127
MS110
MS1000
MS1600
MS1900
ME1099
 

MS1400
MS130B1
MS180
ME181
ME112
MS150
MS15
MS25
MS140
MS160
MS10
MS13
MS12

C120 **
C120N
C220A**
C220 **
C220B**
C335
C335S
C435
C435A
C420
C450
C455
Sentinel
**

MS16 - Plug-in PROM type only

** Binary Output changes not
not supported.

NRI Mechanisms

G13-0000 Acceptor
G13-1000 Acceptor
G13-6000 Acceptor(Not Mft)
G13-7000 Acceptor(Not Mft)
G13-0000 Totaliser
G13-1000 Totaliser
G13-6000 Totaliser
G13-7000 Totaliser
G10-4000
G10-4000/2
G10-4000/5
G10-4000/6
G10-4000/9
G26 (G10-4000 validator)
G26 (G10-4000/5 validator)
G18-0000
G18-3000
G40-various

Mektek Plus Program

Mars Cashflow Mechanisms

CF115
CF126
CF129
CF330
CF340
CF560 (Requires Route Alpha to set values, routing etc)
 

NOTE: Interface looms for mechs shown in Green are included as standard.  Others are extra - see Additional Looms